Advertisement
Attach GTV-580 to Cradle (DVB-T module)
1. Place the GTV-580 at a downward angle into the base of the
cradle.
2. Align three grooves and docking connector to push down
GTV-580 inward until the top clip locks into place.
3. Clean windshield glass thoroughly with glass cleaner.
4. Moisten suction cup and attach mount to the windshield.
5. Lock mount lever by moving forward.
To release, bring lever back and pull on the suction cup's clear
tab to release suction. Never pull on mounting arm to remove
from glass.
It is suggested that you attach the mount in the appropriate
place in your car. Do not mount in front of an airbag panel, or
block the driver's vision.
This Manual: http://www.manuallib.com/file/2551100
Release
Lock
9
Advertisement
