Door Reversal - Samsung DV56H9100E Series User Manual

installing your dryer

Door rEVErSal

If you want to reverse the direction of the door, it is recommended calling a qualified
service technician.
1. Unplug the power cord.
2. Remove the one screw from the COVER HANDLE.
3. Remove the 7 screws (M5, M4 2type) from the BRACKET DOOR.
4. Remove DOOR from BRACKET DOOR.
5. Remove the RINE-E and PIN from the BRACKET DOOR.
6. Remove the BRACKET DOOR from the HINGE.
7. Remove the 4 screws (M4 2EA, M5 2EA), HOLDER LEVER, COVER
HINGE, BRACKET LEVER from the left side of FRONT.
WARNING
LEVER LINK will be appear by spring if you don't push COVER HINGE.
Assemble the BRACKET DOOR, PIN and RING-E on the opposite side
using the PIN that were removed in Step 4.
8. Remove the 2 screws and COVER HOLDER LEVER from the right side
of FRONT.
9. Assemble the HOLDER LEVER, COVER HINGE, BRACKET LEVER and
COVER HOLDER LEVER on the opposite side using the screws that
were removed from the left side in Step-7,8.
DV9100HA DRY_DV56H_USER MANUAL_DC68-03170K-01_EN.indd 20
Push the COVER HINGE strongly when you disassemble screws
on COVER HINGE from the left side of FRONT.
Use to remove COVER HOLDER LEVER With (-) driver.
RING-E
English - 20
PIN
2014-2-26 10:25:42