Related Manuals for Samsung DV53BB8900 Series
Summary of Contents for Samsung DV53BB8900 Series
- Page 1 Dryer User manual DV53BB8900** DV8900HB_SimpleUX_WEB_OID57652_English.indd 1 2022-09-07 11:27:14...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Regulatory notice FCC Notice IC Notice Open Source Announcement Installation requirements Key installation requirements Location considerations Ducting requirements (Not applicable to ventless (heat pump) models) Exhausting requirements (Not applicable to ventless (heat pump) models) Gas requirements (Not applicable to ventless (heat pump) models) - Page 3 Operations Control panel Operating a cycle Cycle overview Options Settings Special features Cycle chart Drying guide Maintenance Emptying the water tank Installing the micro soft filter (Optional Filter) Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet English 3 DV8900HB_SimpleUX_WEB_OID57652_English.indd 3...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. - Page 5 WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes. • Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
- Page 6 Safety information WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode.
-
Page 7: California Proposition 65 Warning
WARNING - What to do if you smell gas: • Do not try to light any appliance. • Do not turn on the appliance. • Do not touch any electrical switch. • Do not use any phone in your building. •... -
Page 8: Important Safety Precautions
Safety information Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. -
Page 9: Warnings
18. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 19. Do not insert your hand under the dryer. This may result in injury. 20. Take care that children’s fingers are not caught in the door when closing it. This may result in injury. - Page 10 Safety information • Gas suppliers recommend you purchase and install a UL-approved gas detector. • Install and use in accordance with the manufacturer’s instructions. • Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even after being washed, these items may contain significant amounts of these oils.
-
Page 11: Regulatory Notice
Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1. -
Page 12: Ic Notice
Unintentional emitter per FCC Part 15 Product type : Clothes Dryers Model : DV53BB8900** Responsible Party – U.S. Contact Information Samsung Electronics America, Inc. QA Lab America 19 Chapin Rd. Building D Pine Brook NJ 07058 Tel: 1-973-808-6375 Fax: 1-973-808-63 IC Notice The term “IC”... -
Page 13: Open Source Announcement
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. -
Page 14: Installation Requirements
Installation requirements Read through the following instructions before installing the dryer and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. - Page 15 Dimensions Type Front loading dryer Models DV53BB8900** A. Overall height 38.7 (984) B. Width 27 (686) Dimensions (in. (mm)) C. Depth with the door open 56.1 (1425) D. Depth 34.3 (872) English 15 DV8900HB_SimpleUX_WEB_OID57652_English.indd 15 2022-09-07 11:27:15...
- Page 16 Installation requirements Clearance requirement This clearance requirement is applicable for dryers only. NOTE • For the washer's clearance requirement, see the washer's user manual. • If the washer and dryer have different clearance requirements, use the one with the larger value. Alcove or closet installations WARNING •...
- Page 17 Undercounter installation 39.7 in. (1009 mm) 1 in. (25 mm) 1 in. (25 mm) Pedestal installation 2 in. (50 mm) 6 in. (152 mm) 52.8 in. (1341 mm) English 17 DV8900HB_SimpleUX_WEB_OID57652_English.indd 17 2022-09-07 11:27:15...
- Page 18 NOTE Stacking (SKK-9AL*) Many of Samsung's washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. For details about stacking and compatible models, refer to the user manual included in the stacking kit you purchase.
-
Page 19: Ducting Requirements (Not Applicable To Ventless (Heat Pump) Models)
Ducting requirements (Not applicable to ventless (heat pump) models) Use only for short-run Recommended installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° elbows Rigid Rigid 80 ft. (24.4 m) 74 ft. (22.6 m) 68 ft. (20.7 m) 62 ft. -
Page 20: Exhausting Requirements (Not Applicable To Ventless (Heat Pump) Models)
Installation requirements Exhausting requirements (Not applicable to ventless (heat pump) models) The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a building. Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the room. -
Page 21: Gas Requirements (Not Applicable To Ventless (Heat Pump) Models)
Gas requirements (Not applicable to ventless (heat pump) models) WARNING • Use only natural or LP (liquid propane) gases. • The installation must be conformed with local codes, or in the absence of local codes, with the national fuel gas code, ANSI Z223.1/NFPA 54, latest revision (for the UNITED STATES), or with the natural gas and propane installation code, CSA B149.1 (for Canada). -
Page 22: Electrical Requirements
Installation requirements Electrical requirements The wiring diagram is located on the plate under the control panel or rear frame. WARNING When local codes allow, you can connect the dryer’s electrical supply with a new power supply cord kit, marked for use with a dryer, that is U.L. listed and rated at a minimum of 120 / 240 volts, 30-amperes with three No. - Page 23 • If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer.
-
Page 24: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the parts, contact a local Samsung customer center or the retailer. 01 Worktop 02 Control panel... - Page 25 • The stacking kit allows the dryer to be stacked on top of a washer. Please note that the stacking kit can only be used with Samsung washers and dryers. To purchase a stacking kit above, contact a Samsung service center or local appliance retailer. The stacking kit differs with the washer model.
-
Page 26: Step-By-Step Installation
Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step-by-step installation instructions start below. • Do not remove the protective film on the door before completing the product installation. If you remove the protective film before the installation is complete, the door may get scratched or damaged during installation. - Page 27 STEP 3 Connect the electrical wiring (for electric models) Before connecting the electrical wiring, make sure you have read the “Electrical requirements” section on page 22. 3-wire system 1. Loosen or remove the screws from the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
- Page 28 Installation 4-wire system 1. Remove the external ground connector’s screw and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
- Page 29 STEP 4 Level the dryer To ensure optimal performance, the dryer must be level. Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, turn the leveling feet (B) clockwise to lower the dryer or counterclockwise to raise the dryer.
-
Page 30: Connect The Drain Hose
Installation STEP 5 Power on (for gas models) Make sure all gas connections, the exhaust line, and all wiring are connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 6 below. - Page 31 1. Remove the water tank drain hose from the drain water outlet (A), and then insert it to the holder (B). 2. Insert one end of the accessory hose (long drain hose) into the drain water outlet (A). 3. Place the other end (outlet) of the accessory hose at least 70 mm away from a drain hole.
- Page 32 Installation Over a laundry sink: 1. Make sure to place the end of the accessory hose no more than 3 ft. (90 cm) above the bottom of the dryer. 2. To bend the accessory hose so that it hooks over the edge of the sink, use the supplied plastic hose guide (B) and secure the guide to the wall with a hook or to the tap with a piece of string.
- Page 33 Wall standpipe drain system The drain hose can be placed into a wall standpipe drain system. To keep the end of the drain hose bent, use the supplied hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage. By using the drain pipe of the laundry sink: 1.
- Page 34 Installation Draining to the water tank 1. Remove the long drain hose from the drain water outlet (A). * 70 mm NOTE Completely dry the removed long drain hose and keep it in a safe place for later use. 2. Remove the water tank drain hose from the holder (B), and then connect it to the drain water outlet (A).
-
Page 35: Installation Checklist
Installation checklist • The dryer is plugged into a properly grounded outlet. • All packaging material is completely removed and properly disposed. • The dryer is level and standing firmly on the floor. • The long drain hose is installed if you want water captured by the drying process drained automatically. •... -
Page 36: Exhaust Ducting Guide (Not Applicable To Ventless (Heat Pump) Models)
Installation Exhaust ducting guide (Not applicable to ventless (heat pump) models) Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. - Page 37 2. Remove the six screws fastening the door glass at the inner side of the door. Remove the bottom three screws first. 3. Disassemble the door glass. CAUTION Be careful not to drop it during disassembling. • You may damage the parts, and broken glass parts may lead to injury.
- Page 38 Installation 5. Remove the two screws that are above and below the cut-out in the front frame. 6. Remove the two screws above and below the lever holder on the opposite side of the door opening. 7. Remove the two screws that hold the lever holder in place, and then remove the lever holder.
- Page 39 9. Remove the single screw from the back of the door hinge. NOTE This is the screw that supports the door against the frame so you can unscrew or screw in the hinge without needing to support the door yourself. 10.
- Page 40 Installation 13. Re-attach the remaining screws to the remaining holes above and below the lever holder, and then tighten. 14. Attach the door on the opposite side and put the door glass back in its place. 15. Fasten the door glass with the six screws. NOTE Firmly hold the door glass to prevent from dropping it while you fasten it with the screws.
-
Page 41: Before You Start
Before you start Here are a few things you should know before starting your dryer. Initial setup • When you turn on your dryer for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. •... -
Page 42: Sort And Load
Before you start Sort and load • Put one wash load in the dryer at a time. • Do not mix heavy and lightweight items. • To improve drying efficiency for one or two items, add a dry towel to the load. •... -
Page 43: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury, read the “Safety information” before operating this appliance. Control panel Tap to turn the dryer on or off. • If you do not manipulate the control panel for 10 minutes after the dryer is turned on, the dryer automatically turns off. - Page 44 Operations Temperature can only be adjusted in Time Dry cycle. Tap to change the 07 Temp. temperature of the current cycle. Tap to select the cycle time for Time Dry, Air Fluff or Self Dry. You can set the 08 Time drying time between 20 minutes and 240 minutes.
-
Page 45: Operating A Cycle
Operating a cycle 1. Tap to turn on the dryer. 2. Turn the Navigation dial to select the cycle you want. For more information on “Cycle overview”, see page 46. 3. Tap Dryness, Temp., or Time to change the default cycle settings. 4. -
Page 46: Cycle Overview
Operations Cycle overview NOTE Other cycles can be used after adding them to your cycle list using the My Cycles function. For more information, see the “My Cycles” section on page 49. Cycle Description Normal For most fabrics including cotton and linens. AI Optimal Dry Auto-optimized drying by AI according to the load and ambient temperature. - Page 47 Cycle Description For reducing energy usage. This cycle adjusts the cycle time and temperature Eco Normal for increased efficiency. For freshening up or airing items of laundry that have not been worn for long. Turn the Navigation dial to select Air Fluff and tap Time to set the drying Air Fluff time between 20 minutes and 240 minutes.
-
Page 48: Options
Operations Options Using Options 1. Tap Options. 2. Turn the Navigation dial to select the desired option. 3. Tap OK to change the selected option’s settings. NOTE • To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK. •... - Page 49 Damp Alert This option alerts you when shirts and other items that require ironing are dry enough to be suitable for ironing. 1. Select a cycle and change the cycle settings as necessary. This option is available for Normal, AI Optimal Dry, Super Speed, Delicates, Activewear, Denim, Shirts, Blouses, Perm Press, and Eco Normal with Dryness set to 2-5.
- Page 50 Operations Drum Light You can turn the drum light on or off. 1. Tap Options. 2. Turn the Navigation dial to select Drum Light, and then tap OK. 3. Tap OK to select On or Off. The drum light turns on even when the dryer is off. (If the dryer is plugged into a power outlet.) When the dryer door opens, the drum light automatically turns on and automatically turns off after 2 minutes.
-
Page 51: Settings
Settings Using Settings 01 * * Tap and hold 3 seconds. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial and select the desired setting, and then tap OK. 3. Tap OK to change the settings or start the function. NOTE •... - Page 52 Operations Sound You can turn on or off the sound from the dryer. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Sound, and then tap OK. 3. Tap OK to select On or Off. The default setting is On.
-
Page 53: Special Features
Special features Smart Control You can connect to the SmartThings app and control your dryer remotely. Connecting your dryer • Download and open the SmartThings app on your mobile device • Tap to turn on the dryer. • Tap and hold Smart Control on the dryer. a. - Page 54 • This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app by searching for “SmartThings”. Download and install the app on your device. NOTE The app is subject to change without notice for improved performance.
-
Page 55: Cycle Chart
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about full. Do not add items over this level as they need to tumble freely. • Medium load: Fill the drum to about full. - Page 56 Operations NOTE : factory setting, : can be selected Options Cycle Functions (Temp. Control) Time Damp Alert Wrinkle Prevent Normal Level 3 AI Optimal Dry Level 3 Time Dry Level 4 (Adjustable) Super Speed Level 4 ...
-
Page 57: Drying Guide
Drying guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Items Description Follow the care label instructions or dry using Bedding. Bedspreads &... -
Page 58: Maintenance
Maintenance Emptying the water tank Empty the water tank after each use to prevent leaks. 1. Remove the water tank (A) from the dryer. Pull the water tank handle with one hand until the tank is halfway out. Once the water tank is halfway out, support the bottom of the tank with the other hand and pull it slowly with both hands. -
Page 59: Installing The Micro Soft Filter (Optional Filter)
Installing the micro soft filter (Optional Filter) You can install the provided micro soft filter (Optional Filter) to prevent dust accumulation on the heat exchanger. 1. Gently press the top part of the outer cover (A) to open. 2. Unlock the inner cover fixers (B), and then pull the inner cover to remove. -
Page 60: Cleaning
Maintenance 4. Reinsert the inner cover to its original position, and then lock the fixers. 5. Close the heat exchanger’s outer cover. Cleaning WARNING • Do not clean the dryer by directly spraying water onto the dryer. • Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discoloration, deformation, damage, electric shock, or fire. - Page 61 Lint filter Clean the lint filter after each use. 1. Open the dryer door, grab the top of the lint filter, and pull to remove the filter. Do not detach the rubber sealing after removing the filter. 2. Open the outer filter and remove the inner filter (A). 3.
- Page 62 Maintenance NOTE To clean the filters thoroughly, clean the filters in running water, and then dry them completely. 5. Put the inner filter into the outer filter, and then reinsert the lint filter into the original position. CAUTION • Clean the lint filter after each load. Otherwise, the drying performance may decrease. •...
- Page 63 Heat exchanger When it is time to clean the heat exchanger, the dryer will alert you by displaying the “Clean heat exchanger & tap OK“ or “Clean heat exchanger optional filter & tap OK” message. A dirty heat exchanger will hinder the product’s performance and should be cleaned regularly. NOTE •...
- Page 64 Maintenance 3. Clean the dust on the heat exchanger using the provided brush. After cleaning with the brush, wipe off the remaining dust using a smooth, damp cloth. CAUTION • To avoid physical injury and burns, do not touch or clean the heat exchanger with bare hands.
- Page 65 Micro soft filter (Optional Filter) When it is time to clean the Micro soft filter (Optional Filter), the dryer will alert you by displaying the “Clean Micro soft filter (Optional Filter)” message. A dirty Micro soft filter (Optional Filter) will hinder the product’s performance and should be cleaned regularly.
-
Page 66: Troubleshooting
Troubleshooting Checkpoints If you encounter a problem with the dryer, first check the table below and try the suggestions. Problem Action • Make sure the dryer is plugged in. • Make sure the door is properly closed. • Check the fuse or reset the circuit breaker. Dryer does not start. - Page 67 If the hose is frozen, submerge it in warm water to allow the water inside the hose to melt and drain out. Reconnect the hose and check for proper draining. If a problem persists, contact a local Samsung service center. English 67 DV8900HB_SimpleUX_WEB_OID57652_English.indd 67...
-
Page 68: Information Codes
• If the information code remains, contact a Samsung service center. Incorrect door switch. • Contact a Samsung service center. • Clean the lint filter and the heat Air temperature sensor problem exchanger. • If this continues, call for service. - Page 69 • Try restarting the cycle. the main and the inverter PBAs. • If this continues, call for service. Compressor overheating • Call for service. If any information code keeps appearing on the display, contact a Samsung service center. English 69 DV8900HB_SimpleUX_WEB_OID57652_English.indd 69 2022-09-07 11:27:31...
-
Page 70: Specifications
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems. Tumble Dry Cycles Normal Permanent Press... -
Page 71: Protecting The Environment
Protecting the environment This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance. - Page 72 Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center to receive warranty service.
- Page 73 Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues. EXCLUSION OF IMPLIED WARRANTIES IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW.
- Page 74 Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada.
- Page 75 (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance, or installation is not covered by warranty. Please contact the Samsung call center at the number above for help with any of these issues. English 75 DV8900HB_SimpleUX_WEB_OID57652_English.indd 75...
- Page 76 If you change the factory default setting or enable other features, power consumption could increase and exceed the limits qualified for ENERGY STAR. QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DV8900HB_SimpleUX_WEB_OID57652_English.indd 76 2022-09-07...