Advertisement
Using Serato Flip
Launching Serato DJ and a controller
Please see the manual of each controller for instructions on launching Serato DJ and
a controller, loading a track and using Hot Cue.
Loading a track and setting a Hot Cue point
The steps to use Serato Flip for editing an original track to make a different
are illustrated below.
[Original track]
Intro
[Edited track using Serato Flip]
(Intro is removed by replacing it with Outro.)
Outro
1)
Select a crate where a track you want to use to display it in the tracklist.
2)
Press the [BACK] button on the controller to move the cursor to the library
and turn the rotary selector to select a track.
3)
Press the [LOAD] button (for DDJ-SZ, press the rotary selector)
to load the selected track to the deck.
4)
Select Hot Cue mode for the performance pad mode.
(for DDJ-SX2 and DDJ-SZ, the [HOT CUE] mode button is lit with white.)
5)
Set the following 2 Hot Cue points on the original track.
Hot Cue
point 1
Intro
Creating a Flip using Serato Flip
1)
Show the Flip panel on the Serato DJ GUI.
･ For DDJ-SX2, DDJ-SZ, and DDJ-SX, the Flip panel can be shown by
clicking the [PANEL SELECT] button.
2)
Show the Flip slot on the virtual deck of Serato DJ.
･ Click the Flip tab on the deck to show the Flip slots.
3)
4)
Outro
Outro
5)
Saving the created Flip in a slot
Hot cue
point 2
1)
Outro
6
6
Flip is ready for recording.
【DDJ-SX2】
Press the [FLIP REC] button.
【DDJ-SZ / DDJ-SX / DDJ-SR / DDJ-SP1】
Press the [PARAMETER (left)] button.
DDJ-SX2
(Also for DDJ-SX, DDJ-SR, and DDJ-
SP1, use the [PARAMETER (left)]
Play a track.
Play Hot Cue in accordance with the following sequence.
･ As soon as Hot Cue is played, a Flip will be recorded.
Hot Cue
Hot Cue
point 2
point 1
Outro
Stop the Flip record.
【DDJ-SX2】
Press the [FLIP REC] button again.
【DDJ-SZ / DDJ-SX / DDJ-SR / DDJ-SP1】
Press the [PARAMETER (left)] button again.
※ The recorded Flip data is stored in the temporary storage area.
If you do not save the Flip in the Flip slot and close Serato DJ, the Flip
in the temporary storage area will be lost.
※ As soon as the Flip record is stopped, the Flip will be played in loop.
p
pp
Select a slot to save a Flip.
【DDJ-SX2】
Press the [FLIP SLOT] button.
Whenever the [FLIP SLOT] button is pressed, a slot is switched to the next.
【DDJ-SZ / DDJ-SX / DDJ-SR / DDJ-SP1】
Select a slot on the virtual deck.
DDJ-SX2
For DDJ-SZ, DDJ-SX, DDJ-SR,
and DDJ-SP1, click a slot on the
DDJ-SZ
button.)
,
p
p y
p
GUI.
Advertisement
