Advertisement
DDJ-SZ
[3]
DDJ-SX
[3]
[3]
[1] PARAMETER (left) button
Press this button to trigger the same action as the [FLIP REC] button
only when HOT CUE mode / SAVED FLIP mode is selected.
Press:
Flip is ready for recording.
･ Press the [PARAMETER (left)] button again to finish recording a Flip.
When Flip Loop is enabled, Flip Loop playback starts as soon
as the Flip recording is finished.
[SHIFT] + Press:
Enable and disable Flip Loop.
[2] PARAMETER (right) button
Press this button to trigger the same action as the [FLIP START] button.
only when HOT CUE mode / SAVED FLIP mode is selected.
Press:
Flip is enabled to start the playback from the beginning of the Flip.
･ Press this button during Flip playback to return the Flip to its beginning.
[SHIFT] + Press:
Flip is enabled and disabled.
Even when a Flip is enabled, the Flip will not start until the track reaches
to the beginning of the recorded Flip.
DDJ-SR
[1]
[2]
DDJ-SP1
[1]
[1]
[2]
[2]
[3] HOT CUE mode button
When the [HOT CUE] mode button is pressed during HOT CUE mode:
SAVED FLIP mode is activated.
When the [HOT CUE] mode button is pressed during SAVED FLIP mode:
HOT CUE mode is activated.
･ In SAVED FLIP mode, a Flip in a slot can be called directly by pressing
the performance pads. Please see the section [Using Saved Flip] for
further details.
※ For the 3 controllers, DDJ-SX, DDJ-SR, and DDJ-SP1, as the
[HOT CUE] mode button is lit in the same way both in HOT CUE and SAVED
FLIP mode, it is difficult to identify which mode is currently selected.
You need to be very careful not to mix up with the both modes.
5
5
[3]
[3]
[1]
[2]
[1]
[2]
Advertisement
