Advertisement
Using performance pads to call and play a Flip
in a slot
1)
Press the [HOT CUE] mode button when the Hot Cue mode is selected
on the controller to activate the SAVED FLIP mode as a pad mode.
･ If you press the [HOT CUE] mode button again, it will be switched back
to the Hot Cue mode.
※ During SAVED FLIP mode, the LED of the [HOT CUE] mode button
on DDJ-SX2 and DDJ-SZ is changed to light blue.
HOT
CUE
SAVED FLIP mode on DDJ-SX2 and DDJ-SZ
SAVED FLIP mode on DDJ-SX
(For DDJ-SR and DDJ-SP1, use the [HOT CUE]
mode button in the same location as in the above.)
2)
Press a performance pad to call the Flip saved in the slot.
The called Flip will be played from the beginning of the Flip.
･ When the performance pad 1 is pressed, a Flip saved in Slot 1 is called
and played from the beginning of the Flip.
･ When a performance pad is pressed while pressing the [SHIFT] button,
a Flip saved in the Slot is called, but it will not jump to the beginning
of the Flip.
In this case, once the track playback position reaches to the beginning
of the Flip, the Flip playback starts.
Using performance pads during playing a Flip
to jump to the beginning of the Flip
Every time a performance pad is pressed during playing a Flip,
it will jump to the beginning of the Flip.
Using performance pads to finish a Flip
Press a performance pad while pressing the [SHIFT] button during a Flip playback
to finish the Flip to go back to a normal playback.
About trademarks and registered trademarks
･ Pioneer is a registered trademark of PIONEER CORPORATION.
･ Serato DJ and Serato Flip are registered trademarks of Serato Audio Research
Ltd., registered in the U.S. and other countries.
©2014 PIONEER CORPORATION.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
9
9
Advertisement
