Table of Contents
Advertisement
MSP-BX1600.OM.QXD
4/17/02
TO PLAY THE RADIO
1
1
2
Press the POWER button
turn the unit on. Press the
FUNCTION button
selected.
4
1
1
2
Adjust the VOLUME
buttons
as desired.
TUNING:
MANUAL TUNING: Repeatedly press the TUNING buttons to manually advance the frequency in the
display up or down until the desired frequency appears.
AUTOMATIC TUNING: Press and hold the TUNING buttons until the frequency in the display starts to scan,
and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat
this procedure until the desired frequency appears in the display.
FM STEREO:
When the Band is set to FM and a strong FM stereo station is broadcasting, the ST (Stereo) indicator will
appear in the display.
ANTENNAS:
AM – This unit has a built-in ferrite rod antenna, which provides adequate reception in most areas. If
reception is weak, turn the unit to improve reception.
FM – The FM Rod Antenna is for FM reception only. If reception is weak, adjust the length of the antenna.
10:52 AM
Page 6
OPERATION
2
to
Press the BAND button to select
AM or FM.
until radio is
VOLUME BUTTONS
1
and EQ
To adjust the volume, simply
press the VOLUME Up or Down
button, the level will be briefly
shown on the display.
3
Press the TUNING buttons to
select a station as described
below.
EQ BUTTON
1
Repeatedly press the EQ button
to select the desired EQ setting
(ROCK, POP, CLASSIC, Off).
6
Hide quick links:
Advertisement
Table of Contents
