TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
Slide the Function switch to the CD
position to turn the unit on and select
CD mode; the POWER ON indicator
will light. Insert a CD as described on
page 9.
1
3
1
2
Use the Skip/Search o 1 or n 2 but-
ton to select the first track to be pro-
grammed.
5
1
2
Repeat steps 3 and 4 to program the other
desired tracks in sequence.
When the program memory is full, the unit
will run through the programmed tracks in
the display and then revert to "01".
SEE NEXT PAGES FOR NOTES ON PROGRAMMED PLAY
OPERATION (CONTINUED)
1
2
Press the PROGRAM button; "01" on
the display and the PLAY/PROG indi-
cator will blink.
4
Press the PROGRAM button again;
the selected track has now been pro-
grammed and counted as program 1.
6
Press the PLAY/PAUSE (®/p) button to
begin
Programmed
PLAY/PROG indicator will blink and the
tracks will play in the order programmed.
11
playback;
1
2
the