Sony HCD-GNZ333D Service Manual page 25

QQ
3 7 63 1515 0
[DVD SHIP AND COLD RESET]
Procedure:
1. Press the button to turn the power on.
@/1
2. Press the [FUNCTION] button to select DVD function.
3. Press three buttons of [FUNCTION],
simultaneously.
4. After blink "STANDBY", "RESET" is displayed, disconnect
the AC plug.
[DVD SLOT LOCK]
• This mode is for the antitheft of DVD disc in shop. (not for
transport)
Procedure:
1. Press the button to turn the power on.
@/1
2. Press the [FUNCTION] button to select DVD function.
3. Insert a disc.
4. While pressing the
seconds.
5. The message "LOCKED" is displayed and the disc slot is
locked. (Even if exiting from this mode, the disc slot is still
locked)
6. If press the button to eject the disc, the message "LOCKED"
Z
is displayed and can not eject the disc.
7. To release this lock, while pressing the
button for 5 seconds again.
Z
8. The message "UNLOCKED" is displayed and the disc slot is
unlocked.
[DVD COLOR SYSTEM] (EXCEPT E13 MODEL)
• This mode let you change the color system of the video output
TE
L 13942296513
from PAL to NTSC or vice-versa. This mode is not available
for Latin American and Russian models.
Procedure:
1. Press button to turn on the system.
@/1
2. Select DVD function.
3. Press button again to turn off the system.
@/1
4. After pressing the [DISPLAY] button, press
button simultaneously. The system will turn on automatically.
The message "COLOR PAL" or "COLOR NTSC" appears on
the LCD display.
[DVD SERVICE MODE]
• This mode let you make diagnosis and adjustment easily by
using the remote commander and the TV. The instructions,
diagnostic results, etc. are given on the on-screen display.
• TEST DISC LIST
Be sure to use the DVD disc that matches the signal standards of
your region.
• CD
YEDS-18 (Part No.: 3-702-101-01)
PATD-012 (Part No.: 4-225-203-01)
• DVD SL (Single Layer)
NTSC : HLX-503 (Part No.: J-6090-069-A)
HLX-504 (Part No.: J-6090-088-A)
PAL : HLX-506 (Part No.: J-6090-077-A)
• DVD DL (Dual Layer)
www
NTSC : HLX-501 (Part No.: J-6090-071-A)
HLX-505 (Part No.: J-6090-089-A)
PAL : HLX-507 (Part No.: J-6090-078-A)
.
http://www.xiaoyu163.com
and
DVD N
button, press the button for more 5
x Z
button, press the
x
button and
X
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
• Procedure to enter to DVD Service Mode:
1. Press button to turn on the system.
@/1
2. Select DVD function.
3. Press
DVD N
turn the [VOLUME] knob clockwise.
@/1
4. The message "SERVICE IN" appears on the LCD display and
the Top Menu of Remocon Diagnosis Menu appears on the
on-screen display on the TV. The model name, main unit's
micom version information (IF-con) and DVD firmware
version information (Syscon) are displayed at the bottom of
the on-screen display.
Remocon Diagnosis Menu
0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History
4. Version Information
Model Name : EROD_ME
IF-con
Syscon
5. To execute each function, press its number by using numeric
button on the remote commander.
6. To release from this mode, press
system.
• Execute IOP Measurement
In order to execute IOP measurement, the following standard
Q Q
3 6 7 1 3 1 5
procedures must be followed.
1. From the Top Menu of Remocon Diagnosis Menu, select "2.
Drive Manual Operation" by pressing the [2] button on the
remote commander. The following screen appears on the on-
screen display.
Drive Manual Operation
@/1
1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Mecha test Mode
5. MIRR time Adjust
0. Return to Top Menu
2. Select "3. Manual Adjustment" by pressing the [3] button on
the remote commander. The following screen appears on the
on-screen display.
1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eg Boost Adjust:
6. Iop:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:
co
O o Change Value
RETURN Return to previous menu
.
HCD-GNZ333D/GNZ444D
9 4 2 8
button and button simultaneously and then
Z
: V er. 01.00 (0000)
: Ver. 1.200
button to turn off the
@/1
0 5 8 2 9 9 4 2 8
Manual Adjust
m
Ver. 1.1
9 9
9 9
25