Vehicle/Manual Organization; Important Safety Notes - Team Losi 8IGHT-T 2.0 Setup Sheet

STEP I-01
q
Welcome Team Losi Racing 8IGHT-T 2.0 Owner!
Thank you for selecting the 8IGHT-T 2.0 as your new racing truggy. The 8IGHT-T 2.0 has already distinguished itself as a top caliber racing chassis and
as you will see, we have made every effort to produce a vehicle that is not only the most competitive but also easy to maintain. The simple step-by-step
assembly sequence and easily followed instructions and drawings combined with Team Losi Racing's world famous quality fitting parts will make using
the 8IGHT-T 2.0 a most enjoyable vehicle.
Please take a moment to read through the following instructions. This will familiarize you with the various parts, assembly tips and descriptions as
well as the tools needed. Taking an extra moment before using your vehicle will help you understand the dynamics of the 8IGHT-T 2.0 and setup tips to
ensure the best possible experience.
Good luck and good racing,
Team Losi Racing
Register your Losi Product Online:
Register your 8IGHT-T 2.0 now and be the first to find out about the latest options parts, product updates and more. Log on to www.LOSI.com
and follow the product registration link to stay connected.
Overall Chassis Length: 18.75" (476mm)
Overall Length w/Tires: 20.6" (523mm)

Vehicle/Manual Organization:

The vehicle is composed of different steps marked A through H. Each
step contains all of the parts necessary to complete a particular section
of the vehicle. Some of these steps have sub-assembly steps within them.
It is helpful to read through the instructions for an entire step prior to
working on your vehicle. Next to each of the step numbers is a check box.
At the completion of each step, place a check in this box so that if you
must stop and come back to the assembly, you will be able to pick up
where you left off.
For your convenience, an actual-size Hardware Identification Guide is
included as a fold-out page at the back of this manual. Hardware that
is not easily differentiable in each step is called out with an icon which
contains a small picture of the part genre (referenced on the Hardware
Identification Guide), the quantity of that part required for what is shown
in the step, and the size or name of that part. To check a part, hold it
against the silhouette until the correct part is identified. Associated with
each of these parts, in the Hardware Identification Guide, is an LOSA-
Number which is used when
ordering replacement parts
for your 8IGHT-T 2.0. In some
cases, extra hardware has been
supplied for parts that may be
easy to lose.
Components used in each step
are identified by their relative LOSA-Number and the component's
name. With the exception of a few parts, these are not referenced in the
Hardware Identification Guide.
The molded parts in Team Losi Racing vehicles are manufactured to
demanding tolerances. When screws are tightened to the point of
being snug, the parts are held firmly in place. For this reason, it is very
important that screws not be overtightened in any of the plastic parts.
In some steps there will be a filled black circle with a white number.
These indicate the specific order by which assembly must occur. In cases
INTRO
Intro to the 8IGHT-T 2.0
8IGHT-T 2.0 COMPLETED KIT SPECIFICATIONS
Wheelbase: 14.41"-14.57" (366-370mm)
*Overall Height: 7.30" (185 5mm)
Note: Final vehicle weight will vary depending on accessories used.
*All measurements taken at ride height (36mm).
Table 1: 8IGHT-T 2.0 Completed Vehicle Specifications.
Manual
™
where steps are repeated (front/rear or left/right) these numbers may be
omitted. Please note that these numbers will not call out every sub-step
required for the step's assembly procedures, they will only highlight the
critical order required for assembly.
In each step, there are specific "Detail Icons" (shaped like a stop sign) that
call out critical precautions or assembly tips for the process. There is a
reference key that describes the meaning of each of the icons located on
the fold-out Hardware Identification Guide at the back of this manual.
To ensure that parts are not lost during construction, it is recommended
that you work over a towel or mat to prevent parts from rolling away.

IMPORTANT SAFETY NOTES:

1. Select an area for assembly that is away from the reach of small
children. Some parts in this vehicle are small and can be swallowed
by children, causing choking and possible internal injury; PLEASE USE
CAUTION!
2. The shock fluid and greases supplied should be kept out of
children's reach. They are not intended for human consumption!
3. Exercise care when using any hand tools, sharp instruments, or
power tools during construction.
4. Carefully read all manufacturer's warnings and cautions for any
chemicals, glues, or paints that may be used for assembly and
operating purposes.
i
*Front Track Width: 16.0" (406mm)
*Rear Track Width: 16.0" (406mm)