Sharp LC-60LE830E Service Manual page 12

[2] OPERATION MANUAL
Attaching the stand unit
Before attaching (or detaching) the stand, unplug the AC cord.
Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over .
1
Confirm that there are twelve screws (eight long
screws and four short screws) supplied with the
stand unit.
Set the supporting post for the stand unit
1
2
onto the polystyrene foam.
Attach the stand base to the supporting
2
post.
Insert and tighten the eight screws into the
3
eight holes on the bottom of the stand base.
Hold the stand unit securely with one hand, and
then tighten the screws.
t S n a d b a e s
Supporting post
3
4
o L n g c s e r w s
TV front
1 – 7
LC-60LE635E(B),RU(B)/636E(B),S(B)/638E(B)
Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
Soft cushion
Insert and tighten the four screws into the four
holes on the rear of the TV.
Short screws