188
4-2. Driving procedures
Turn signal lever
Operating instructions
The lever will return to its original position after operation.
1
Right turn
2
Lane change to the right (move
the lever partway and release
it)
The right hand signals will flash 3
times.
3
Lane change to the left (move
the lever partway and release
it)
The left hand signals will flash 3
times.
4
Left turn
■
Turn signals can be operated when
The power switch is in ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
■
If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
■
To discontinue flashing of the turn signals during a lane change
Operate the lever in the opposite direction.
■
When the lever is pushed and held partway
The turn signals will keep flashing until the lever is released.
■
Customization
The number of times the turn signals flash during a lane change can be
changed. (Customizable feature P. 469)
AVALON_HV_U (OM41457U)