Pin & Pin2; Usim Lock Password - SoftBank 740SC User Manual

PIN & PIN2
USIM Card features 2 security codes: PIN and PIN2.
PIN
Use PIN (4- to 8-digit) to prevent unauthorized use
of handset by others.
・ Modify PIN (fP.10-3).
・ When PIN lock is activated, PIN entry is required
each time handset is turned on or whenever
USIM Card is re-inserted (fP.10-4).
PIN2
PIN2 (4- to 8-digit) is required for Reset Call Cost or
Edit Cost Limit, etc.
・ Modify PIN2 (fP.10-3).
Canceling PIN Lock (PUK/PUK2 Code)
Incorrectly entering PIN or PIN2 three consecutive
times activates PIN Lock and limits handset function
access. Enter PUK (PIN Unlocking Key) Code to
cancel PIN Lock.
For more information, contact SoftBank Mobile
Customer Center, General Information (fP.14-22).
Note
・ Entering PUK or PUK2 incorrectly ten
consecutive times locks USIM Card and
deactivates handset . Take a note of PUK
and PUK2 .
・ A locked USIM Card cannot be unlocked .
Contact SoftBank Mobile Customer Center,
General Information (fP .14-22) .

USIM Lock Password

USIM Password is dedicated to USIM Card
authentication. If USIM Password matches, another
USIM Card can be used in handset. Change USIM
Password each time USIM lock is set to On.
Advanced Settings
b
Account Details
Editing Account Details
c → 0 → a → w (Edit) → (fP.2-15 Saving
as A New Entry )
b
Sending Account Details as vFile
c → 0 → o → Send account details
■ To send via message
Via message → (fP.4-4 S! Mail
■ To send via Infrared
Via infrared (fP.12-3)
Resetting Account Details
c → 0 → o → Reset account details
・ All Account details other than phone number saved
in USIM Card are reset.
Creating vFile and Save in Data Folder
c → 0 → o → Save to Data Folder →
Phone or Memory card → Yes
・ The save location can be set to Memory card if
inserted.
Copying Item in Account Details
c → 0 → Highlight an item to copy →
o → Copy item
・ Copied item can be pasted in the text entry
window.
1
)
b
1-19