Changing Phone Password
Handset uses two kinds of security codes; Phone
Password and PIN/PIN2.
Changing Phone Password
By default, Phone Password is set to "9999".
c → Settings → Security →
a
Change password
b
Enter current Phone Password
→ c (OK)
c
Enter new Phone Password (4
to 8 digits) → c (OK)
d
Enter new Phone Password
again → c (OK)
Changing PIN/PIN2
c → Settings → Security →
a
Change PIN or Change PIN2
・ Set PIN certification to On to enable PIN
or PIN2 codes (fP.9-4).
Enter current PIN or PIN2 →
b
c (OK)
c
Enter new PIN or PIN2 (4 to 8
digits) → c (OK)
d
Enter new PIN or PIN2 again (4
to 8 digits) → c (OK)
Advanced
s
●
Change PIN (rP.12-15)
●
Change PIN2 (rP.12-15)
●
Change Phone Password (rP.12-15)
Lock
Following lock methods are available.
・ Phone lock
・ Auto keypad lock
・ Password lock
・ PIN certification
・ USIM lock
・ Secure Remote Lock
Phone Lock
Activate this function to require Phone Password
entry each time handset is powered on.
c → Settings → Security →
a
Phone lock
b
On or Off
Enter Phone Password →
c
c (OK)
・ If set to On, no operation including receiving calls
can be performed when handset powers on until
Phone Password is entered.
9
9-3