Playback Of A Dvd - Memorex MVDR2100 User Manual

IMPORTANT NOTES:
• "INVALID" will appear on the TV screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, "NO DISC" will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD
recorder that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so
they are not explained in this owner's manual.
• While the DVD Recorder is in another mode (F-AV,F-SV,R-A/V, etc), press the PLAY (‹) button to change the recorder
to DVD mode.

PLAYBACK OF A DVD

1
Press the ON/STANDBY button to turn on the unit; the
STANDBY indicator will go out.
3
1
2
2
2
2
Press the OPEN/CLOSE button 1 to close the disc tray.
"LOAD" will appear on the screen and in the display. After
loading, the menu screen of the DVD should appear. Use
the Navigation (¦,‹,œ,ƒ) buttons 2 to select the desired
option and the ENTER button „ to select it.
DVD BASIC OPERATION (CONTINUED)
1
2
Press the OPEN/CLOSE button to open the disc tray,
"OPEN" will appear in the display. Insert a disc with the
label side facing up on the disc tray.
4
To stop playback, press the STOP (I) button 1; "PSTOP"
(Pre-stop) will appear on the TV screen. Because the unit
will remember where you stopped, simply press the PLAY
(‹) button 2 to resume playback where you left off
(resuming playback).
If the STOP (I) button 1 is pressed twice, the TV screen
shows "STOP" and the unit will stop completely.
28
2
1