Setting The Rating Level; Changing The Password - Memorex MVDR2100 User Manual

SETTING THE RATING LEVEL

The Rating Level enables parents to prevent their children from watching inappropriate material on a DVD. It reads the
ratings for programming, then denies access to programming if the program's rating meets the limitations you select. In this
case, the user will have to enter a password.
1
3
At the PLAY SETUP MENU, use the Navigation (œ,ƒ)
buttons 1 to select RATING. Press the ENTER button 2 and
then enter your password using the number buttons 3. The
password is "1234", unless it was changed in the
CHANGING THE PASSWORD section below. Press the
ENTER button 2 again; the Set Rating Level screen will
appear.

CHANGING THE PASSWORD

Select this option to change the password.
1
2
Follow step 1 above. Select NEW using the Navigation (‹)
button 1, then press the ENTER button 2.
SETUP MENU (CONTINUED)
1
2
1
1
2
3
Press the ENTER button 1, followed by the Navigation
(œ,ƒ) buttons 2 to select the desired rating as follows:
1 : Kidsafe.
(KIDSAFE)
2 (G): All ages.
3 (PG):
Parental
Guidance.
4 (PG13): Parental
Guidance less
than 13 years old.
5 (PGR):
Under 17 years
old, Parental
Guidance
suggested.
Press the ENTER button 1 again to confirm. Press the
SETUP button 3 to exit the setup menu or select "OK", then
press the ENTER button 1 to exit the setting the Rating
Level screen.
2
1
Enter the New Password using the Number buttons 1, then
press the Navigation button (ƒ) 2 to access the Confirm
Password field. Enter the New Password again using the
Number buttons 1, then press the ENTER button 3; the
new password will be set, make sure to write it down.
25
2
1
2
6 (R):
Under 17 years
old, Parental
Guidance
strongly
suggested.
7 (NC17): 17 years old
and above.
8 (ADULT):Adult only.
OFF: Select OFF if
you do not want
to set a rating.
3
2