Replacing The Cover - RM ONE User Manual

3: Fitting Hardware Options
3. Unscrew and remove the four screws, which secure the rear
cover. Put these screws in a safe place.
4. The rear system exhaust fan is attached to the rear cover and
connected to the system mainboard via a fly lead. Carefully
remove the rear cover to a distance of around 5cm and
disconnect the fly lead from the mainboard, taking note of its
position.

Replacing the Cover

To replace the cover ensure that all cables are tucked out of the
way. Reconnect the fan fly lead to the system board and position
the rear cover in place. You may need to adjust its position to
ensure that the rear cover sits flush all round before you screw
the panel into position.
30