Track By 800D Web Based Tracking Software; Enable Gprs; Set Apn; Set Ip And Port - I-Trac GTLT2 User Manual

Example: 2110000
Description:
The command to enable geo-fence alarm
When the GPS tracker is in/out of the preset square, GTLT2 will send sms alert and location coordinates to
the first authorize phone number.
Meanwhile, GTLT2 will call the first authorized phone number first; if failed, then call the second authorized
phone number; if failed once again, then call the third authorized phone number.
Command 3: 210****
**** is the default password. Default:0000
Example: 2100000
Description:
The command to close geo-fence alarm.

5. Track by 800D web based tracking software

5.1. Enable GPRS

Send the SMS to the tracker as following format:
Command
710****
Command format:
For example: 7100000

5.2. Set APN

Send the SMS to the tracker as following format
Command
Command format:
Format 1:#803#****#APN##
Format 2:#803#****#APN# APN user
name#APN password ##
For example:
#803#0000#CMNET##

5.3.Set IP and Port

Send the SMS to the tracker as following format:
Command
GTLT2 USER MANUAL,
Page 14 of 21
www.i-trac.cn
Remark
**** is the default
Default:0000
710 : Command code
0000: password, default 0000
Remark
**** is the default password.
Default:0000
Use format 2 if your APN requires APN
user name and APN password.
803 : Command code
0000: password, default 0000
CMNET: APN, is gateway to connect
internet, Each country is different, please
contact your SIM card provider for APN
name.
Remark
password.