Nikon SB-N10 User Manual page 85

The Targeting Lamp Button
❚❚
Turn the targeting lamp on or off or en-
able fl ash-compensation support.
• To turn the targeting lamp on or off (
press the button for about a second
and then release it. The lamp will turn
off automatically when the fl ash fi res.
• To disable or enable fl ash-compensation
0
support ( 23, 24), select TTL mode
and keep the button pressed until
the fl ash-ready lamp changes color
(about three seconds). The fl ash-
ready lamp lights red when fl ash-
compensation support is enabled
and blue when fl ash-compensation
support is disabled. If the fl ash unit is
turned off , the most recently selected
setting will be restored the next time
the unit is turned on.
0
28),
En
5