Nikon SB-N10 User Manual page 112

2 Immerse the unit.
After confi rming that the battery holder is inserted and se-
curely latched, immerse the unit in a basin of fresh water. To
prevent water entry and other damage, do not remove the
battery holder while the unit is immersed.
D Salt Damage
Leaving the unit immersed for too short a time could result in salt crystals
forming when the unit dries. Such crystals are hard to remove and may
impair the waterproof seal, resulting in water leaking into the unit. Always
immerse the unit in fresh water and rinse it thoroughly to remove salt
after use.
En
3 Clean the controls.
Gently move the unit side to side, then open and close the
sensor cover and operate the controls a few times to re-
move salt and other foreign objects.
4 Wipe dry.
Dry the unit thoroughly with a soft, dry cloth. Do not use a
cloth to which salt has adhered.
32