Yamaha R1 YZF-R1 Owner's Manual page 90

PERIODIC MAINTENANCE AND ADJUSTMENT
TIP
1
Skip steps 5–7 if the oil filter cartridge is
not being replaced.
2
5. Remove the oil filter cartridge with
an oil filter wrench.
3
4
5
1
6
7
1. Oil filter cartridge
2. Oil filter wrench
8
TIP
9 An oil filter wrench is available at a
Yamaha dealer.
10
6. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
11
12
1. O-ring
TIP
Make sure that the O-ring is properly
2
seated.
7. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1
1. Torque wrench
7-13
1
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
9. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.