Yamaha R1 YZF-R1 Owner's Manual page 36

INSTRUMENT AND CONTROL FUNCTIONS
item. Select the triangle mark to exit
1
that screen and move back one screen
(or long push the wheel switch to exit
2 MENU entirely).
TIP
3
Should vehicle motion be detected, the
screen will automatically exit MENU
and change to the main screen.
4
5 "Display Mode"
There are two main screen display
modes, STREET MODE and TRACK
6
MODE.
7
To set the main screen display mode
1. Long push the wheel switch to en-
ter the MENU screen.
8
9
10
11
12
2. Select "Display Mode".
3. Select STREET MODE or TRACK
MODE (or select the triangle mark
to exit).
4. Long push the wheel switch to exit
the MENU screen or use the wheel
switch to select another module.
"YRC Setting"
This module allows you to customize
4-15
the four YRC modes
MODE-B, MODE-C, MODE-D by ad-
justing the setting levels (or on/off sta-
tus as applicable) of YRC items PWR,
TCS, SCS, LCS, QSS, and LIF. For
YZF-R1M, you can select the ERS
mode to be associated with each YRC
mode, and also adjust the setting levels
of the ERS modes.
TIP

TCS has 9 setting levels and ERS
has 6 modes.

Whenever there are more selec-
tions (setting levels or modes)
available than can be shown on
the screen at one time, a scroll bar
will appear to notify you that addi-
tional selections are available by
scrolling.
PWR
Select PWR-1 for the most aggressive
throttle response, PWR-2 and PWR-3
for smoother throttle grip/engine re-
sponse, and use PWR-4 for rainy days
or whenever less engine power is desir-
able.
MODE-A,