Usim Card Installation - SoftBank 200SH User Manual

Close Port Cover
・Close Port Cover firmly. Debris trapped between gasket and
base may expose handset to liquid/dust. (Port Cover must
be closed properly to maintain water/dust resistance.)
・Take care not to lose Installation Tool.
Battery Cover
General
Use handset with Battery Cover installed.
Replacement
If Battery Cover is damaged, replace it with a new one.
Protective Sheet Cautions
Under Protective Sheet
There are Battery and precision parts under Protective
Sheet. Do not peel, damage or subject it to impact; may
cause malfunction, overheating, ignition, electric shock,
impairment, burn injuries, etc.
Heat Caution
Protective Sheet ( ) may be hot to the touch while
power is on or immediately after powering off, leading to
burn injuries.

USIM Card Installation

USIM Card is an IC card containing customer and
authentication information, including handset number.
SD/USIM Card Insertion/Removal Tool
There are two inscriptions (one for USIM and one for microSD)
on SD/USIM Card Insertion/Removal Tool. Align the USIM side
over the back of handset.
・Always use SD/USIM Card Insertion/Removal Tool (hereafter
"Insertion/Removal Tool) included with SoftBank 200SH to
remove USIM Card. Using other devices may damage handset
and USIM Card.
9