SoftBank 200SH User Manual page 15

Table of Contents

Advertisement

Removing SD Card
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch (
) to remove it.
Open Card Slot Cover
Align Insertion/Removal Tool with Card Slot, with the SD side
(microSD挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
・Pull back Insertion/Removal Tool slowly (SD Card pops out
slightly). Pulling it back quickly may make SD Card jump out.
Remove SD Card
・Remove carefully without bending it.
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.
13

Advertisement

Table of Contents
loading

Table of Contents