SoftBank 200SH User Manual page 12

Table of Contents

Advertisement

10
Inserting USIM Card
Power off and wait until handset cools down beforehand. Do
not touch Protective Sheet while handset is hot; may cause
burn injuries.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
from the other notch (
) to remove it.
Open Card Slot Cover
Insert USIM Card into USIM Card Slot
・Confirm orientation of USIM Card (see the notch), then
insert it with metal contacts facing down.
Align Insertion/Removal Tool with Card Slot, with the USIM
side (USIM挿抜時:この面が背面側) facing up
・Set Card Slot Cover downward as shown so as not to get it
caught between handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid/dust.
Replace Battery Cover
・Align at Power Key side, then firmly press down along edges.
Do not apply excessive force to Battery Cover; damage may
result.

Advertisement

Table of Contents
loading

Table of Contents