Consumer Information Parts IMPORTANT! Please remove all parts from the package and identify WARNING them before assembly. To prevent serious injury or death: • Fall Hazard - Never use this product on an elevated surface, since child’s movement may cause the product to slide or tip over.
Page 3
Assembly Side Rails Crossbar Front Bar Side Rails Hint:You may want to install batteries into the soother before assembling the front bar to the front rails. • Place the side rails on a flat surface. • Position the front bar so that the soother is upright. Fit it to grooved •...
Page 4
Assembly Buckle Pad Flap Pocket Hardboard • Wrap a pad flap around a front rail and fasten the buckle. Make sure you hear a “click”. • Repeat this procedure to fasten the other pad flap. • Locate the pocket in the bottom of the pad. •...
Battery Installation Setup and Use WARNING 1,5V To prevent serious injury or death: "D" (LR20) • Fall Hazard - Never use this product on an elevated surface, since child’s movement may cause the product to slide or tip over. Use only on a floor. •...
Page 6
Setup and Use LIFT Kickstand EXTEND FRAME SEAT Extend Frame Seat • Lift the seat back to extend the frame for toddler use. • Pull the tab on each front kickstand out and then rotate the kickstand down. • Rotate the rear kickstands down. PUSH PRESS PRESS...
Page 7
Secure Your Child Soothing Vibrations Waist Belt Waist Belt Restraint Pad • Turn the toy bar out of the way or remove it altogether. • Place your child in the seat. Position the restraint pad between your child’s legs. • Fasten the waist belts to each side of the restraint pad. Make sure •...
Page 8
Fold for Portability and Storage Care • The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. The frame, toy bar and toys may be wiped clean using a mild cleaning solution and a damp cloth.
Need help?
Do you have a question about the T4146 and is the answer not in the manual?
Questions and answers