Getting Started Controls; Operational Instructions; Charging; Power Up - AT&T LoudSpeak’r BTS01 User Manual

Getting Started
Controls
1 2 3
4 5 6 7 8
during Bluetooth Music Playback
1. Previous track
2. Play/Pause
3. Next track
during Phone Calls
1. and 3. Mute/Unmute the microphone
2. During ringing: Answer incoming call/
Reject incoming call (long press)
During the call: End current call/
Toggle audio between the phone and
speaker (long press)
Page 6
9 10 11 12 13
General
4. Microphone
5. Volume down
6. LED indicator
7. Power ON/OFF;
Enter Bluetooth paring mode
(Long hold while device is off)
8. Volume up
9. Stereo speaker
10. Passive radiator subwoofer
11. OFF /ON switch
12. USB charging jack
13. Aux-in jack

Operational Instructions

Charging

- Charge your LoudSpeak'r through any USB jack or wall charger.
- The LED indicator will begin to blink blue.
- Full charge time is two hours and the LED indicator will stop blinking.

Power up

- Slide the switch on the back of the speaker to the ON
- Press and hold the until the front LED indicator turns on blue.
- To power down your speaker, hold down the
"Goodbye"
- On the back of the speaker, slide the main power switch to the OFF
prevent accidental button presses.
using the audio Line in Connection (AUx-INPUT)
- To playback your music via the AUx-IN port, plug a standard stereo headphone
cable (3.5 mm) from your audio device to LoudSpeak'r and begin playback on your
audio device.
position.
button until the speaker says
position to
Page 7