Welcome | Thank you for purchasing the COM 801 Introduction Features High powered Wireless speaker Wireless streaming through Bluetooth® enabled devices Built-in microphone Auxiliary input to play music from any device Automatically connects to any paired devices Page 2...
Introduction Features What’s Included Safety Information Warning! Important Safety Instructions Getting Started Location of Main Unit Controls Charging the COM 801 LED Status Indicator Powering ON/OFF Operational Instructions Wireless Operation for pairing Setting up your COM 801 TWS Pairing Operation Using the auxiliary input connection (3.5mm)
Safety Information Warning! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. WARNING: To The exclamation and arrowhead reduce the risk point within symbol within of electric shock, the triangle is the triangle is do not remove a warning sign...
Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit.
Page 7
Power Cord protection - Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against them. It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet.
Getting Started Location of Main Unit Controls Buttons & Interface View: 4. Increase Volume + | Skip to next track 2. Play/Pause Music & Answer 5. Micro USB charging port & LED light - Power Indicator and Bluetooth Indicator /End Call/TWS function 3.
Charging the COM 801 Connect a Micro USB charging cable to the charging port on the COM 801. 2. Connect the USB end of the Micro USB cable to your computer’s USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the Micro charger interface of the speaker will turn red.
Operational Instructions Wireless Operation The COM 801 connects with most Bluetooth devices including iPad devices, ® iPhone devices, and iPod touch devices, and most smartphones, ® ® laptops, and tablets. Setting Up Your for Pairing COM 801 Turn on the COM 801 wireless sp eaker COM 801 is now ready to be paired with your Bluetooth device.
You can connect the audio output of an external device, such as a MP3 player or smartphone, to the for listening to the audio of that device COM 801 through the speaker system. Use a standard stereo Aux (3.5 mm) cable to connect the “audio line-out”...
Wireless - Make sure there isn’t a 3.5mm cable connected to the aux input on the back of the speaker. - Restart the COM 801 to auto-connect with your Bluetooth device. No power - Recharge your speaker using included cable.
Compliance with FCC Regulations Caution! party responsible for compliance could void the user’s authority to operate the measures: and operated to provide a separation distance of at least 5mm from all persons THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada. Exclusions: REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER;...
Page 15
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. rights which vary from state to state. Obtaining Service: the date of purchase, model number and a brief description of the 1-800-8-BATTERY.
Page 16
www.att.com/electronics “The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. 2020 Issue 1.1 AT&T 11/2020...
Need help?
Do you have a question about the COM 801 and is the answer not in the manual?
Questions and answers