Welcome | Thank you for purchasing the S30 Introduction Features High powered Wireless speaker Wireless streaming through Bluetooth® enabled devices Built-in microphone Auxiliary input to play music from any device Automatically connects to any paired devices Page 2...
Location of Main Unit Controls Charging the S30 LED Status Indicator Powering ON/OFF Operational Instructions Wrieless Operation Setting up your S30 for pairing TWS Pairing Operation Using the auxiliary input connection (3.5mm) Button controls Call function Troubleshooting Compliance with FCC Regulations...
Safety Information Warning! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. WARNING: To The exclamation and arrowhead reduce the risk point within symbol within of electric shock, the triangle is the triangle is do not remove a warning sign...
Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit.
Page 7
Power Cord protection - Power supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against them. It is always better to have a clear area from where the cable exits the unit to where it is plugged into an AC outlet.
Getting Started Location of Main Unit Controls Buttons & Interface View: 4. Increase Volume + | Skip to next track 2. Play/Pause Music & Answer 5. Micro USB charging port & LED light - Power Indicator and Bluetooth Indicator /End Call/TWS function 3.
Getting Started Charging the S30 Connect a Micro USB charging cable to the charging port on the S30. 2. Connect the USB end of the Micro USB cable to your computer’s USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the Micro charger interface of the speaker will turn red.
Navigate to the Bluetooth manager on your Bluetooth device Search Bluetooth devices and select ‘S30’ to start connecting. Once paired, the S30 will beep and the Bluetooth LED light will turn solid blue. Your Bluetooth device is now paired, connected, and ready to stream audio to the speaker system.
Using the Auxiliary Input Connection (3.5mm) You can connect the audio output of an external device, such as a MP3 player or smartphone, to the S30 for listening to the audio of that device through the speaker system. Use a standard stereo Aux (3.5 mm) cable to connect the “audio line-out”...
Recharge your speaker using included cable. If the problem cable. Battery is not charging Verify S30 is plugged in properly and into a proper power source. Power Output: 5W X 1 Play time: Up to 4 hours Impedance: 4 5w Rechargeable Battery: 3.7V/1200mAh (Built-In)
Compliance with FCC Regulations Caution! party responsible for compliance could void the user’s authority to operate the measures: and operated to provide a separation distance of at least 20 cm from all persons THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada. Exclusions: REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER;...
Page 15
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. rights which vary from state to state. Obtaining S ervice: the date of purchase, model number and a brief description of the...
Need help?
Do you have a question about the S30 and is the answer not in the manual?
Questions and answers