Locking or Changing Image Brightness before
Recording
You can lock the exposure before or during recording or adjust it in 1/3-
stop increments within a range of –2 to +2 stops.
1
Lock the exposure.
●
Press the [ ] button to lock the
exposure. The exposure shift bar is
displayed.
●
To unlock the exposure, press the [ ]
button again.
2
Adjust the exposure.
●
Turn the [ ] dial to adjust the exposure,
as you watch the screen.
3
Shoot (= 64).
Correcting Severe Camera Shake
Counteract severe camera shake, as when recording movies while
moving. The portion of images displayed changes more than for
[Standard], and subjects are further enlarged.
●
Follow the steps in "Recording Movies
with Subjects at the Same Size Shown
before Recording" ( = 52) to choose
[High].
Still Images
Movies
Recording Movies in Short Clip Mode
Apply playback effects to brief clips of a few seconds, such as fast motion,
slow motion, or replay. Clips recorded in this mode may be included in
Story Highlights albums ( = 103).
Still Images
Movies
●
[Dynamic IS] is not available when [IS Mode] is set to [Off]
( = 51).
●
Only [Standard] is available when the movie quality is set to
[
].
Still Images
1
Enter [
] mode.
●
Set the mode dial to [
●
Press the [ ] button, choose [
menu, and then choose [
●
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
2
Specify the shooting time and
playback effect.
●
Press the [ ] button.
●
Turn the [ ] dial to set the shooting time
(4 – 6 sec.), and press the [ ][ ] buttons
to set the playback effect, as described
below.
3
Shoot (= 64).
●
A bar showing the elapsed time is
displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Movies
Other Shooting Modes
P Mode
Tv, Av, and M Mode
].
Playback Mode
] in the
] ( = 27).
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
65