Removing The Battery Pack And Memory Card - Canon Power Shot SX710 HS User Manual

3
Check your card's write-protect
(1)
switch and insert the memory card.
●
Recording is not possible on memory
cards with a write-protect switch when the
(2)
switch is in the locked position. Move the
switch toward (1).
●
Insert the memory card with the terminals
(2) facing as shown until it clicks into
place.
●
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
Close the cover.
●
( 1 ) Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
( 2 )
position (2).
●
For guidelines on how many shots or hours of recording can be
saved on one memory card, see "Number of Shots per Memory
Card" ( = 171).

Removing the Battery Pack and Memory Card

Remove the battery pack.
●
Open the cover and press the battery
lock in the direction of the arrow.
●
The battery pack will pop up.
Remove the memory card.
●
Push the memory card in until it clicks,
and then slowly release it.
●
The memory card will pop up.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
18