Canon Power Shot SX710 HS User Manual page 112

● Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
( = 28) ► [
] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].
●
You can also send multiple images at once and change the image
size before sending ( = 124).
Using Another Access Point
When connecting the camera to a smartphone with the [ ] button or
through the Wi-Fi menu, you can also use an existing access point.
1
Prepare for the connection.
●
Access the [Waiting to connect] screen
by either following steps 1 – 3 in "Sending
to a Smartphone Assigned to the Button"
( = 109) or steps 1 – 4 in "Adding a
Smartphone Using the Wi-Fi Menu"
( = 110).
2
Connect the smartphone to the
access point.
3
Choose [Switch Network].
●
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Switch Network], and then
press the [ ] button.
●
A list of detected access points will be
displayed.
][ ] buttons to
] button. To add a
Previous Access Points
To reconnect to a previous access point automatically, follow step 3 in
"Sending to a Smartphone Assigned to the Button" ( = 109) or step 4 in
"Adding a Smartphone Using the Wi-Fi Menu" ( = 110).
●
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
●
To reconnect to a previous access point, follow the procedure from
step 5 in "Using Another Access Point" ( = 112).
●
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in "Using Another Access Point" ( = 112) from step 4.
4
Connect to the access point and
choose the smartphone.
●
For WPS-compatible access points,
connect to the access point and choose
the smartphone as described in steps
5 – 8 in "Using WPS-Compatible Access
Points" ( = 115).
●
For non-WPS access points, follow steps
2 – 4 in "Connecting to Listed Access
Points" ( = 117) to connect to the
access point and choose the smartphone.
5
Configure the privacy settings and
send images.
●
Follow steps 5 – 6 in "Adding a
Smartphone Using the Wi-Fi Menu"
( = 110) to configure the privacy
settings and send images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
112