Fill The 2-In-1 Water Tank; Measuring Cup; Operation; Before You Clean - Bissell Powerbrush 1622 Series User Manual

S
pecial features of your BISSELL deep cleaner

Measuring cup

Your deep cleaner is equipped with a measuring
cup for adding the proper amount of formula
to the 2-in-1 water tank. For convenience the
measuring cup is built into the lid of the 2-in-1
water tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a
heavy duty bladder inside for clean water. As you
clean, the clean water in the bladder will empty
and mix with the cleaning formula. Dirty water
pulled out of your carpets will collect around the
outside of the bladder so that clean and dirty
water are always kept separate. This allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying and filling.
O
peration

Before you clean

1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning
an entire room (optional).
3. Vacuum area with a dry vacuum cleaner
before deep cleaning.
4. Plan your cleaning route to leave an exit path. It
is best to begin cleaning in the corner farthest
from your exit.

Fill the 2-in-1 water tank

1.
With your foot, press the handle release
lever on the back of the machine and lay
handle down to access the tank.
2.
Remove the tank from the base of the machine
by lifting the tank carry handle.
6
w w w . b i s s e l l . c o m
Carry Handle
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum or
deep cleaner may aggravate this
condition.
3
4
1.
Handle Release Lever
Measuring Cup
2.