Voicemail And Message Retrieval - Zte Consumer Cellular Quick Start Manual

CALLING FEATURES
THREE-WAY CALLING
While on an existing call, press the
your phone to put the first party on hold. When you hear a dial
tone, dial the second party's number (wait for up to 4 seconds).
When the second party answers, press the
key again to complete the three-way connection.
If the second party does not answer, press the
Talk) key to end the connection and return to the first party.
NOTE:
If your phone does not have a Flash (Phone/Talk)
key, use the off-hook mechanism supported by your
phone instead.
10
Flash (Phone/Talk) key on
Flash (Phone/Talk)
Flash (Phone/

VOICEMAIL AND MESSAGE RETRIEVAL

VOICEMAIL AND MESSAGE RETRIEVAL
Voicemail is just like a virtual answering machine, and it comes
free with your Wireless Home Phone Base service. When you
miss a call or choose not to answer, calls are sent to your
voicemail the same way they would be sent to your answering
machine. Follow the steps below to set-up and use your voicemail.
VOICEMAIL SET-UP
Press 1 on any home phone connected to the Wireless
Home Phone Base and wait 4 seconds to connect to your
Consumer Cellular voicemail.
Simply follow the voice prompts to complete set-up.
To enable remote voicemail retrieval and for added security,
be sure to create a password during set-up.
MESSAGE WAITING
There are two indicators to let you know that you have received
a new voicemail message.
The Voicemail icon on the Wireless Home Phone Base (shown
below) will blink when a new voicemail message is waiting.
You will also hear an intermittent dial tone on any connected
phone handset before placing a call if any new voicemail
messages are waiting.
Voicemail icon
11