Jumperfree Configuration - Asus P5RD2-VM User Manual

2.4.2

JumperFree Configuration

Configure System Frequency/Voltage
Overclocking
Memory Clock Mode
OverClock Memory Clock
Overclocking [Auto]
Allows selection of CPU overclocking options to achieve desired
CPU internal frequency. Select either one of the preset overclocking
configuration options:
Manual - allows you to individually set overclocking parameters.
Auto - loads the optimal settings for the system.
The following item appears only when you set the AI Overclocking item
to [Manual].
CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus and
PCI bus. The value of this item is auto-detected by the BIOS. Use the <+>
and <-> keys to adjust the CPU frequency. You can also type the desired
CPU frequency using the numeric keypad. The values range from 100
to 400. Refer to the table below for the correct Front Side Bus and CPU
External Frequency settings.
FSB/CPU External Frequency Synchronization
Front Side Bus
FSB 1066
FSB 800
FSB 533
ASUS P5RD2-VM
[Auto]
[Manual]
[275MHz]
CPU External Frequency
266 MHz
200 MHz
133 MHz
Select the target CPU
frequency, and the
relevant parameters
will be auto-adjusted.
Frequencies higher
than CPU manufacturer
recommends are not
guaranteed to be
stable. If the system
2-19