Scanning Folders And Tracks; Pausing Mp3/Wma/Wav Playback; Selecting The Search Method - Pioneer FH-P5000MP Operation Manual

Section
07 MP3/WMA/WAV Player
3 Push Multi Control up to turn random
play on.
RDM :ON appears in the display. Tracks will
play in a random order within the previously
selected FLD or DSC ranges.
4 Push Multi Control down to turn ran-
dom play off.
RDM :OFF appears in the display. Tracks will
continue to play in order.

Scanning folders and tracks

While you are using FLD, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using DSC,
the beginning of the first track of each folder
is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
3 Push Multi Control up to turn scan play
on.
Scan :ON appears in the display. The first 10
seconds of each track of the current folder (or
the first track of each folder) is played.
4 When you find the desired track (or
folder) push Multi Control down to turn
scan play off.
Scan :OFF appears in the display. The track (or
folder) will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.
26
En
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Push Multi Control up to turn pause on.
Pause:ON appears in the display. Play of the
current track pauses.
3 Push Multi Control down to turn pause
off.
Pause:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.
2 Push Multi Control left or right to select
the search method.
Push Multi Control left or right until the de-
sired search method appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 tracks