Selecting The Search Method; Searching Every 10 Tracks In The Current; Disc; Using Compression And Bmx - Pioneer FH-P5000MP Operation Manual

Section
06 Built-in CD Player
3 Push Multi Control down to turn pause
off.
Pause:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
# If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.
2 Push Multi Control left or right to select
the search method.
Push Multi Control left or right until the de-
sired search method appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.
2 Push and hold Multi Control left or
right to search every 10 tracks on a disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi Control right recalls the last
20
En
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi Control right re-
calls the last track of the disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi Control left recalls the first
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi Control left re-
calls the first track of the disc.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
2 Push Multi Control up or down to select
your favorite setting.
Push Multi Control up or down repeatedly to
switch between the following settings:
COMP OFFCOMP - 1COMP - 2
COMP OFFBMX - 1BMX - 2

Using disc title functions

You can input CD titles and display the title.
The next time you insert a CD for which you