Memorex iWake Mi4004 User Manual page 12

TO SET OR RESET THE ACTUAL TIME
1
With the power off, press the
TIME SET button; the time will
blink.
3
Press the TIME SET button (or
wait approx. 5 seconds) and the
time will be set.
OPERATION (CONTINUED)
1
1
2
Within 5 seconds, press the MN
(Minute) button 1 to set the
present minute and the HR (Hour)
button 2 to set the present hour.
Make sure to set the correct
AM/PM setting.
DST (DAYLIGHT SAVINGS TIME)
1
For your convenience, there is a
DST (Daylight Savings Time) switch
located on the rear of the unit. Slide
the switch to +1 to add an hour to
the actual time or slide the switch to
-1 to subtract an hour from the actual
time.
11
2
1