Table of Contents
Advertisement
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1
3
With a CD inserted, press the
PLAY/PAUSE
button ‚ to turn the unit on and press
the STOP (I)/POWER OFF button ƒ to
stop auto playback. Press the PROG
button „; the PROG indicator will blink
in the CD display.
3
2
Press the PLAY/PAUSE (
/POWER ON button ‚ to begin
Programmed playback and adjust the
VOLUME control ƒ and DBBS switch
„ as desired.
NOTES:
•
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
•
As each program is played, the track number is shown in the display.
•
To clear the memorized program, press and hold the PROG button while in
the Stop mode until the PROG indicator disappears in the display.
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
•
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
CD OPERATION (CONTINUED)
1
(
)/POWER
1
2
Select the first track to be played back
ON
using the
, then press the PROG button
ƒ button
again. Repeat this step to program
„
additional tracks up to a maximum of
4
To skip forward or backward through
)
the
programs,
SKIP/SEARCH
button. When the disc is through
playing, it will stop.
12
2
SKIP/SEARCH
2
press
‚ or
‚ or
1
the
ƒ
1
Advertisement
Table of Contents
