TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1
With a CD inserted, press the
PLAY/PAUSE
button to turn the unit on and press
the STOP (I)/POWER OFF button to
stop auto playback. Press the PROG
button ; the PROG indicator will blink
in the CD display.
3
Press the PLAY/PAUSE (
/POWER ON button to begin
Programmed playback and adjust the
VOLUME control and DBBS switch
as desired.
NOTES:
•
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
•
As each program is played, the track number is shown in the display.
•
To clear the memorized program, press and hold the PROG button while in
the Stop mode until the PROG indicator disappears in the display.
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
•
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
CD OPERATION (CONTINUED)
1
3
(
)/POWER
4
2
Select the first track to be played back
ON
using the SKIP/SEARCH
button, then press the PROG button
again. Repeat this step to program
additional tracks up to a maximum of 24
tracks.
4
To skip forward or backward through
)
the
programs,
SKIP/SEARCH
button. When the disc is through
playing, it will stop.
12
2
or
2
press
the
or