Related Manuals for Memorex MD6440cp
Summary of Contents for Memorex MD6440cp
-
Page 1: Operating Instructions
PERSONAL COMPACT DISC PLAYER WITH 40-SECOND DIGITAL ANTI SKIP PROTECTION MODEL # MD6440cp BEFORE OPERATING THIS PRODUCT PLEASE READ THESE INSTRUCTIONS COMPLETELY OPERATING INSTRUCTIONS ROHM IC MANUAL COVER... -
Page 2: Table Of Contents
CD door is open and the safety interlocks are defeated. Invisible laser radiation is present when the CD Player's lid is open and the system's interlock has failed or been defeated. It is very important that you avoid direct exposure to the laser beam at all times. Please do not attempt to defeat or bypass the safety switches. -
Page 3: Power Sources
LOCATION OF PROGRAMMED BUTTON CD DOOR DOOR OPEN BUTTON Using Battery 1. Open the lid of the battery compartment. 2. Insert 2 "AA" Size (UM-3) batteries by matching the ( + and - ) to the diagram inside the battery compartment and close the lid. -
Page 4: Headphone And Hi-Fi Connection
Using on the AC Power Adaptor Use only the supplied AC power adaptor. to a wall outlet 120V / 60Hz AC Power Adaptor DC 6V HEADPHONE AND HI-FI CONNECTION Listening with the Headphones Connect the plug of the stereo headphones (included) or earphones (not included) into the PHONES (GREEN) socket. -
Page 5: Car Kit Operations
The cassette adaptor allows you to use your portable CD player with your car stereo cassette system or protable audio cassette system. 1. Position the cassette adaptor cord so the cord extends out from the cassette player when the cassette is inserted. Insert the cassette adaptor in the same direction as you would insert an audio cassette tape. -
Page 6: Playing A Cd Immediately
PLAYING A CD IMMEDIATELY 1. Connect DC 6V Headphone Note 1. Refer to "Power Sources" for details on using with batteries. 2. Connect the headphones firmly. A loose connection may cause static noise during playback. 2. Insert a CD 1. Press OPEN button and open the lid. 2. -
Page 7: Cd Playback
1. Connect the earphones (included) or optional headphones into the Phones jack. 2. Press the Door Open button to open the CD compartment door. 3. Insert a disc with the label side facing up. 4. Close the CD compartment door until a click is heard. 5. -
Page 8: Intro & Special Functions
1. Press the MODE button 3 times to enter the intro mode, “INTRO” appears on the display. 2. Press the PLAY/PAUSE button, CD will player the first 10 seconds of each track on the CD. Dynamic Bass Boost Set the BASS BOOST switch to “ON” position to enjoy a more powerful bass sound. Note : Since Bass Boost performance will change depending on the volume level, sound maybe distorted due to high volume is set. -
Page 9: Programmed Play
Up to 20 tracks on a disc can be programmed for play any order. 1. Press the PROG button during stop. 2. Press the SKIP/SEARCH button to select a track. 3. Press the PROG button. 4. Repeat steps 2 and 3 to programme tracks. 5. -
Page 10: Maintenance
MAINTENANCE Cleaning the Cabinet Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. Cleaning the Lens A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows : Dust or Dry Particles Using a camera lens brush / blower, blow on the lens couple times, then wipe it lightly with the brush... -
Page 11: Product Specifications
PRODUCT AUDIO D / A conversion Frequency response Anti shock Wow and flutter No. of channels Output level Bass boost effect ( 100 Hz ) PICK-UP System Laser diode Properties Error correction GENERAL Power requirements Power consumption Dimension Weight SPECIFICATIONSDE 1-BIT DAC eight times oversampling 20 - 20,000Hz ( +1 / -3 dB ) 40 seconds buffer... -
Page 12: General Information
Increase the volume Replace with fresh batteries, or use AC power Try another compact disc Clean or replace the compact disc or clean the pickup lens Place the CD Player on a level surface that is stable ( no vibrations ) -
Page 13: Limited Warranty
D ) Damage resulting from the improper connection to equipment of other manufacturers. This warranty does not cover: A) Cost incurred in the shipping of the product to and from the Memorex authorized repair facility listed. B) Damage or improper operation caused by the failure to follow the operating instructions provided with the product. - Page 14 Memcorp, Inc. Weston, FL33331 © 2000 Memorex is a trademark of Memorex Telex. N.V. Printed in Hong Kong Visit Our Website : www.memorex. com...