To Program The Memory (Up To 24 Tracks) - Memorex MD6883 User Manual

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)

1
3
With a CD inserted, press the
PLAY/PAUSE (®p)/POWER ON button
1 to turn the unit on and press the
STOP (I)/POWER OFF button 2 to
stop auto playback. Press the PROG
button 3; the PROG indicator will
appear in the CD display.
3
2
Press the PLAY/PAUSE (®p)/POWER
ON button 1 to begin Programmed
playback and adjust the VOLUME
control 2 and DBBS switch 3 as
desired.
NOTES:
• Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program: while in the Stop mode, press the PROG button
followed by the STOP (I)/POWER OFF button.
• Programming is the ability to preselect the order in which a series of tracks will be
played.
• Each track may be stored in the program memory as many times as desired (up to
24 tracks).
CD OPERATION (CONTINUED)
1
1
2
2
Select the first track to be played back
using the Skip/Search/Tuning
2 button, then press the PROG button
3
again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
4
1
2
To skip forward or backward through the
programs, press the Skip/Search/ Tuning
o 1 or n 2 button. When the disc is
through playing, it will stop. Press the PROG
button 3 followed by the PLAY/PAUSE
(®p)/POWER ON button 4 to play back
the programmed tracks again.
14
o 1 or n
4
3