Serial Port - Nexcom IPPC 1632P Series User Manual

Chapter 4: BIOS Setup
Onboard Serial Port Max Baud Rate
This field configures the maximum baud rate of the serial port 1, the options
are 115200 bps and 921600 bps.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot
Serial Port 1 Configuration
[Enabled]

Serial Port

Device Settings IO=2F8H; IRQ=3;
[IO=2F8H; IRQ=3;]
Change Settings
Onboard Serial Port 1 Mode [RS232]
Onboard Serial Port Max Baud Rate [115200
Onboard Serial Port Max Baud Rate
115200 bps
921600 bps
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Save & Exit
Security
Change the Serial Port Max Baud
Rate. Select <115200 bps> or
<921600 bps>
bps]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port 2 Configuration
This section is used to configure serial port 2.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
74
Enable or Disable Serial Port
(COM)
[Enabled]
IO=3E8h; IRQ=7;
[IO=3E8h; IRQ=7;]
[115200 bps]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IPPC 1632P/2132P Series User Manual