Table of Contents
Advertisement
Chapter 3: System Setup
4. Insert the module into the socket at an approximately 30 degrees angle.
Apply firm even pressure to each end of the module until it slips into
the socket. The gold-plated connector on the edge of the module will
almost completely disappear inside the socket.
5. Push the module down until the clips on both sides of the socket lock
into position. You will hear a distinctive "click" sound, indicating the
module is correctly locked into position.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
SODIMM
SODIMM
socket
44
Note:
1. If only one SO-DIMM is installed, please install it to the
one closest to the panel.
2. The maximum RAM size is 4G (2x 2G or 1x 4G)
IPPC 1632P/2132P Series User Manual
Advertisement
Table of Contents
