Chapter 4: BIOS Setup
IDE Configuration
This section is used to configure the IDE devices.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0
Not Present
SATA Port1
Not Present
SATA Controller(s)
[Enabled]
Configure SATA as
[AHCI]
Configure SATA as
IDE
AHCI
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SATA Controller(s)
Enables or disables SATA controller.
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
Configure SATA as
Configures the SATA as IDE or AHCI mode.
IDE
AHCI
Select a configuraton for SATS
Controller
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
70
This option configures the Serial ATA drives as Parallel ATA physical
storage device.
This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver to enable
the advanced Serial ATA features which will increase storage
performance.
IPPC 1632P/2132P Series User Manual