Fisher & Paykel ActiveSmart E331T Installation Instructions And User Manual page 6

Safety and warnings
4
Keep ventilation openings, in the appliance enclosure or in the
■ ■
built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the
■ ■
defrosting process.
Do not damage the refrigerant circuit.
■ ■
In case of damage to the refrigerant circuit, ventilate the area by
■ ■
opening all windows. Do not operate electrical equipment or any
other equipment that may produce arcs, sparks or flames in the
area. Contact your authorised Fisher & Paykel Repairer immediately
to arrange for the appliance to be repaired.
It is hazardous for anyone other than an authorised service
■ ■
person to service this appliance. In Queensland the authorised
service person must hold a gas work licence or authorisation for
hydrocarbon refrigerants to carry out service and repairs which
involve removal of covers.
Disposal
Extreme care must be taken when disposing your old appliance to
■ ■
avoid hazards:
– The refrigerant gas must be safely removed.
– The doors should be removed and the shelves left in place so that
children may not easily climb inside.
Your Fisher & Paykel Authorised Repairer will be able to give advice
■ ■
on environmentally friendly methods of disposing of your old
refrigerator or freezer.
Electrical
Your new appliance must be installed in accordance with the
■ ■
installation instructions before use.
Never unplug your refrigerator or freezer by pulling on the power cord.
■ ■
Always grip the plug firmly and pull straight out from the outlet.
■ ■
Do not plug in any other appliance at the same power point as your
■ ■
refrigerator or freezer or use extension cords or double adapters.