Fisher & Paykel ActiveSmart E331T Installation Instructions And User Manual page 12

Installation instructions
10
4. Installation
Your Fisher & Paykel refrigerator is fitted with front
and rear rollers, designed for moving the product
in the forwards and backwards direction.
Avoid moving the product in a sideways direction
as this may damage the rollers or the floor
covering/surface.
Your refrigerator will arrive with the front feet
A
wound up making moving the product into its
final location a simple task.
Roll the refrigerator into its final position making sure there is the correct air gap between the
B
product and surrounding cabinetry. See minimum clearance in cabinetry dimensions table (refer
to page 9).
Adjust the front feet down until the refrigerator is leaning backward with the front
C
approximately 10 mm higher than the back. This will ensure a good door closing action.
(Refer to Fig.1).
Aligning your refrigerator with cabinetry.
D
Align the sides of the refrigerator with the cabinetry by adjusting the hinge side front foot.
■ ■
Adjust the handle side foot until it touches the floor and takes a small amount of weight.
■ ■
Once the refrigerator is in place and aligned with cupboards/alcove gently push on the front top
■ ■
and check if the product is rocking or stable.
Lower the front
of the refrigerator
Fig.1 Refrigerator feet
Raise the front of
the refrigerator