Viewing Structurescan History; Setting Up The Structurescan Image - Lowrance HDS Gen3 Operator's Manual

To remove the cursor and the cursor elements from the panel, press
the X key or select the Clear cursor option.

Viewing StructureScan history

When the cursor is active in a DownScan view, the history bar is
shown at the top of the panel. The highlighted part of the history
bar shows the image you are currently viewing in relation to the
total StructureScan image history stored. You can pan the history by
dragging the image or the highlighted part of the history bar, to the
left or right.
In a SideScan view, you can pan the image to see sides and history
by dragging the image left, right, and up.
To resume normal StructureScan scrolling, select Clear cursor or
press the X key.

Setting up the StructureScan image

Use the StructureScan menu to set up the image. When the cursor
is active, some options in the menu are replaced with cursor mode
features. Select Clear cursor to return to the normal menu.
78
StructureScan | HDS Gen3 Operator Manual