Zooming The Structurescan Image; Using The Cursor On The Structurescan Panel - Lowrance HDS Gen3 Operator's Manual

Key Description
1
Depth
2
Temperature
3
Bottom
4
Frequency
5
Zoom (downscan) / Range (sidescan) icons
6
Range scale

Zooming the StructureScan image

You can zoom a StructureScan image by:
• using the zoom (+ or -) buttons
• pinching or spreading on the screen
using the +/- keys
•
Zoom level is shown on the upper left side of the panel.
Using the cursor on the StructureScan
panel
By default, the cursor is not shown on the StructureScan image.
When you position the cursor on a DownScan image; the screen
pauses, the cursor information window and the history bar are
activated. On a DownScan image, the depth is shown at cursor
position.
When you position the cursor on a SideScan image; the screen
pauses, and the cursor information window is activated. On a
SideScan image, the left/right distance from the vessel to the cursor
are shown at the cursor position.
StructureScan | HDS Gen3 Operator Manual
77