Storage Configuration - Asus P5N7A-VM Hardware User Manual

SMART Monitoring [Auto]
Enables or disables the S.M.A.R.T. (Self-Monitoring Analysis and Reporting
Technology) capability of your hard drive. This features allows your system to
report read/write errors of the hard drive and to issue warnings when a third
party hardware monitor utility is installed. Configuration options: [Auto] [Disabled]
[Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]
2.3.5

Storage Configuration

The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you want to
configure the item.
Storage Configuration
OnChip S-ATA Controller
SATA Mode select
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
OnChip S-ATA Controller [Enabled]
Allows you to disable or set the OnChip S-ATA devices.
Configuration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID
Mode] [AHCI Mode]
Hard Disk Write Protect [Disabled]
Disables or enables device write protection. This will be effective only if device is
accessed throuh BIOS. Confiuration option: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [5]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
2-16
[Enabled]
[SATA Mode]
[Disabled]
[5]
[Host]
Options
Disabled
Compatiable
Enhanced
Chapter 2: BIOS setup